Kenmore     Now keep

Hi, my name is Bill and today I’m going to show you how to replace the dryer door seal on your dryer The reason why you would have to do this is because its either damaged, worn or you have hot air leaking out of your dryer Warning, before doing any repairs, please disconnect your power source This is our dryer model, it’s a Kenmore Now keep in mind that ours might be a little bit different than what you got at home, but the same techniques should still apply So, for this repair what we’re going to do is open up the door And as you can see here, all around the perimeter is our dryer door seal In order to get this off All you have to do Is just grab a hold of it Pull it I wanna pull it to the right And its going to come out of the little slots its in so Just stretch it a little bit to the right And that will give it some room to come over through the slot and then you can pull it out And we’re going to do that with every single one Just stretch it a little bit And pull it out There we go Now we can set that off to the side Now, you can grab your new OEM replacement dryer door seal If you don’t have one already, you can get one on our online store So now we’re just going to reverse the process here Starting with this and your just going to push it in Slide it on over And do that with every single one There we go Now you can close the door Plug everything back in and your repair is complete Finally, don’t forget to plug in your appliance If you need to replace any parts for your appliance, you can find an OEM replacement part on our website Thanks for reading, and please don’t forget to like comment and share our article Also don’t forget to subscribe to our website, your support helps us make more articles just like these for you to read for free

and please
its either damaged, worn or

to reverse the